Avaya Octel 200 Installation And Maintenance Manual page 284

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

7.3-30
Integration Volume
d. Hang up phone A and the digital phone. Does the corresponding green LED turn OFF?
NO
e.
From phone A call the next digital extension assigned as a line appearance and repeat from step c.
f.
Repeat steps a. through d. for all units and links configured for call processing.
5. PBX BUSY FORWARD TEST
This test verifies that a call to a busy extension forwards to the Octel 200/300 access number.
a.
Connect the 356A adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to Integration Unit
1, Link 1 and connect the second digital phone to the jack position that corresponds to
Integration Unit 1, Link 2.
c.
Make phone C appear busy by taking it off hook.
d. From phone A, call the extension number of phone C.
e.
One of the links should ring immediately.
NO
f.
Answer the call on the link. Hang up the call and phone A.
6. PBX RING-NO-ANSWER FORWARD TEST
This test verifies that a call to a ring-no-answer extension forwards to the Octel
Overture 200/300 access number.
.
a.
Connect the 356A adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to Integration Unit
1, Link 1 and connect the second digital phone to the jack position that corresponds to
Integration Unit 1, Link 2.
c.
Make sure that phone C is on-hook.
d. From phone A, call the extension number of phone C.
e.
Does phone C ring?
NO
f.
After the number of rings configured for RNA in phone C's coverage group, phone C should
stop ringing and one of the links should ring.
NO
g. Answer the call. Hang up the call and phone A.
Octel 200/300
S.4.1
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
Re-enable Ring-no answer coverage for this test.
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
PB60019-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents