Table of Contents
Advertisement
11. FORWARDED INTERNAL CALL FROM AN EXTENSION THAT DOES NOT HAVE THE
EXTENSION NUMBER IN THE NAME FIELD
This test verifies that the Octel 200/300 correctly processes a call to an extension number in the
name field.
a.
With the Superset 4 on-hook, press the PROGRAM softkey, followed by the NAME softkey. The
alphanumeric display should give this prompt:
DIAL IN NAME
b. Program the phone's name to be A by pressing
softkey.
c.
Now press the PROGRAM softkey again followed by the CALL FWD softkey.
d. Use the softkey prompts and alphanumeric display to set up ALWAYS FORWARD call
forwarding to the Octel 200/300.
e.
From phone A, call phone B. Does the Octel 200/300 answer with the greeting for Trunk Group
0?
NO
f.
Enter
Superset 4 using the select features button. Cancel the programmed name by pressing the
PROGRAM softkey followed by the NAME softkey, then pressing the CANCEL softkey.
PB60019-01
Determine the cause and correct the problem before continuing.
'
to exit from the Octel 200/300. Hang up phone A. Turn OFF call forwarding for the
9
9
Mitel SX-100/SX-200 Analog Adaptive Integration
, the NEXT softkey, and then the SAVE
1
10.2-33
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
