Avaya Octel 200 Installation And Maintenance Manual page 640

11-28 Integration Volume
c. Did the Octel 200/300 answer with the prompt, "Extension (telephone C) doesn't answer. Please
leave a message at the tone. . ." ?
YES
NO
d. While still connected to the Octel 200/300, enter mailbox number XXX.
e. Did the Octel 200/300 respond with the prompt, "Thank you. Just a moment" and did phone C
start to ring again?
YES
NO
f. After a predetermined interval (defined by the PBX configured number of ring backs before
RNA forwarding) does respond with, "Extension XXX doesn't answer. Please leave a message at
the tone"?
YES
NO
g. While still connected to the Octel 200/300, enter mailbox number YYY.
h. Did the Octel 200/300 respond with the prompt, "Thank you. Just a moment," and did phone C
start to ring again?
YES
NO
i. After a predetermined interval (defined by the entry in the INFORMATION Table for Ringbacks
Before No Answer) does the Octel 200/300 respond with, "Extension YYY doesn't answer. Please
leave a message at the tone. . ."?
YES
NO
11. CALLING A BUSY EXTENSION
This test verifies that the Octel 200/300 handles a call directed to a busy extension properly.
(Use the same configuration as step 10.
a. Take telephone C off-hook.
b. From telephone A, call telephone C.
c. Did the Octel 200/300 answer with the prompt, "Extension (telephone C) is busy/on the phone.
Please leave a message at the tone". . .?
YES
NO
Octel 200/300 S.4.1
Continue.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
Enter , then hang up.
9 9
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
)
PB60019-01