Table of Contents
Advertisement
15-14
Integration Volume
LI TRA
3. To clear the trace queue, enter Y. New events are printed as an activity occurs.
If you do this, the events already in the trace queue are lost.
.
To see the a trace that has already happened, freeze the trace and then list it.
@conn 4
Connecting to DTC17DPNSS in slot 4
DPNSS>LI TRA
Trace not frozen.
Trace Queue cleared.
01133645.99
TIME STAMP
Time stamp. The time is day, hour, minute, second. For example, for 01133645.99, is read as the first
day of the month (01), 13 hour, 36 minutes, 45 seconds.
Device Time Slot is the port on the DTIC being used; DC is the data channel.
Event type. This is the activity that is happening. Typical events are
CCS Layer 3 RX, which shows protocol packets received from the PBX
-
CCS Layer 3 TX, which shows protocol packets sent to the PBX
-
CCS Layer 4 RX, which shows the protocol packets received from the message server
-
CCS Layer 4 TX, which shows the protocol packets sent to the message server
-
Message type. Refer to Table 1−2 for a list of message types.
Octel 200/300
S.4.1
.
Enter
Clear Trace Queue and continue? (y/n): y
Will print new events as they occur...
30
CCS Layer 3 RX
DEVICE TIME SLOT
EVENT TYPE
ISRC* 1#
*50*79060101#*18*27*31*31#*19* Z#4000
SUPPLEMENTAL INFORMATION
MESSAGE TYPE
DESTINATION ADDRESS
PB60019-01
Advertisement
Chapters
Table of Contents
