Avaya Octel 200 Installation And Maintenance Manual page 174

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

7.1-36
Integration Volume
c.
Go off hook on Line 10 and press LWC−STORE key. Does the green lamp come ON steady?
NO
d. Enter the extension number of phone B, then hang up. Is phone B's message waiting indicator
ON?
NO
e.
Go off-hook on Line 10 and press feature key 2, then enter the extension number associated with
phone B. Hang up. Is phone B's message waiting indicator OFF?
NO
Does the green lamp go on steady?
NO
f.
Repeat steps a. through e. for all links configured.
10. DISPLAY TEST FOR DIRECT CALLS
This test verifies that ATTIC receive the proper display information from the DEFINITY G3i
for direct internal and direct external calls.
.
a.
Connect the 356A adapter to the 25-pair cable associated with the configured slot.
b. Connect one digital phone to the jack position of the adapter that corresponds to Integration Unit
1, Link 1, and connect the second digital phone to the jack position that corresponds to
Integration Unit 1, Link 2.
c.
Using phone A, call out of the PBX and back in on a trunk which auto-terminates to the message
server ATTIC hunt group.
d. Press the Inspect Mode key to look at the displays on the ringing line on the digital phones. The
second line of the display should contain this information:
a =
T-XXX is the group name of the trunk group the call came in on. A-YYY is the extension of the
ATTIC hunt group.
If the display does not contain this information, determine the cause and correct the problem
before continuing.
e.
Hang up phone A.
f.
Using phone A, call into the ATTIC hunt group directly.
g. Look at the display of the digital phone. The second line of the display should contain this
information:
a =
Octel 200/300
S.4.1
Check the feature button assignment. Refer to Figure 7.1-5.
'
Check the feature options, LWC Reception. Refer to Figure 7.1-13.
'
Check the feature options. Refer to Figure 7.1-13.
'
Check the feature button assignment. Refer to Figure 7.1-14.
'
The PBX information appears on the second line of the 7407D display. Pay no attention to the
first line of the display.
T−XXX
to
A−YYY
Test AXXX
XXX
PB60019-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents