Avaya Octel 200 Installation And Maintenance Manual page 650

11-38 Integration Volume
For information on hardware errors regarding integrated systems, refer to the Installation and
Maintenance volume, System Errors and Traffic Pegs chapter, for more information.
Octel 200/300 S.4.1
LINK-INDEPENDENT PEGS. Independent pegs refer to overall card
operation. They do not indicate an error condition.
PEG 1 Number of times a non-maskable interrupt (NMI)
was received.
PEG 2 Timeout occurred when attempting to send a reply
to the CPU.
LINK-DEPENDENT PEGS. There are 10 pegs for each link. The pegs
correspond to each link separately. They may indicate an error
condition.
PEG 1 Number of times SELFTEST failed on the link.
PEG 2 Number of times a display character would
overflow the display line.
PEG 3 Number of times an incomplete packet was
received down link.
PEG 4 Number of times a call was answered, but did not
receive display information.
PEG 5 Number of times display was not decodable.
PEG 6 Number of times the poll task failed.
PEG 7 Number of times the Display Key was pressed, but
the LED did not go ON.
PEG 8 Number of times a glare occurred.
PEG 9 Number of times the Display LCD was in the
wrong state when attempting to press it.
PEG 10 Not used.
PB60019-01