Avaya Octel 200 Installation And Maintenance Manual page 703

12A. MESSAGE WAITING FOR SYSTEMS USING THE OCTEL 200/300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting indication for systems using MWI.
a. Take phone B off-hook so that it appears busy.
b. From phone A, call out and back in on a trunk auto-terminated to the Octel 200/300.
c. Does the Octel 200/300 answer properly?
NO
.
d. Call the extension number of phone B. Does the Octel 200/300 respond with "Extension EXT-B
is busy. Please leave a message at the tone, enter another extension number, or press zero for
assistance" ?
e. Leave a test message for phone B.
.
f. Does the Octel 200/300 light the message waiting indicator on phone B?
.
NO
g. From phone B, call the Octel 200/300 and enter mailbox B. The Octel 200/300 should respond
with "You have one message. Ready."
h. Listen to the test message.
i. Press
with "One message will be erased. . . "? Press
respond with "Good-bye. . . "?
NO
j. Hang up phone B. Is the message waiting indicator turned OFF?
.
NO
PB60019-01
Determine the cause, and correct the problem before continuing.
'
You may prefer to use the Quick Message feature to leave a message for phone B instead
of following the instructions in step d. and e.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave a
test message approximately 15−20 seconds in length to ensure a valid message. The
mailbox for phone B must be entered in the Octel 200/300 USER Table or the Octel
200/300 does not offer to take a message.
It may take several seconds for the indicator to turn ON.
Determine the cause, and correct the problem before continuing.
'
to erase the message. Press
3
Determine the cause, and correct the problem before continuing.
'
It may take several seconds for the indicator to turn OFF.
Determine the cause, and correct the problem before continuing.
'
Definity G3 Adaptive Integration with APIC
to exit the mailbox. Does the Octel 200/300 respond
9
to exit the system. Does the Octel 200/300
9
12.1-41
Octel 200/300 S.4.1