Table of Contents
Advertisement
Display Phone. The digital portion consists of four ROLMphone 400 telephone lines for the RIC board
in the Octel 200/300. Connect the configured links to the RIC board. These ROLMphone 400 lines
should be configured as described below.
For the Octel 200, the RIC can be installed in slots A1 − A6.
For the Octel 300, the RIC can be installed in slots A1 − A12.
The RIC must be plugged into the configured slot.
Software Requirements
The ROLM software release required for the installation of the Octel 200/300 with the ROLM 9751,
Model 30 or Model 80 using 9006i software is Release 6.1 Kbind KV19 or later.
PB60019-01
ROLM 9751 Model 30/80 Adaptive Integration
Octel 200/300
8.2-5
S.4.1
Advertisement
Chapters
Table of Contents
