Changes For Called Party Identification - Avaya Octel 200 Installation And Maintenance Manual

7.2-26 Integration Volume
System Parameters
SLOTS Table

Changes for Called Party Identification

To configure the Octel 200/300 with called party identification on a System 75, the following
configuration changes must be made through the UPDATE program.
Mailbox COS
INFORMATION Table
Octel 200/300 S.4.1
System Parameter 3 — PBX MODEL
Select the model number of the telephone system (System 75).
System Parameter 116 — SHOULD INTEGRATION BE
ACTIVATED?
Modify System Parameter 116 to be YES.
.
Only one default must be defined for message waiting to
operate correctly.
System Parameter 170 — INTEGRATION LAMP ON/OFF LINK
MUST MATCH
Modify System Parameter 170 to be YES.
Each link for MWI must be programmed as a default or with a specific
COS number.
For each integration unit configured with one or more message waiting
links, the following is also configured:
Whether the link is enabled to perform lamp message waiting
-
indication (MWI).
Whether the link is used as the system default for MWI.
-
.
Only one default must be defined for message waiting to
operate correctly.
Specific COS or ranges of COS for which the link is to perform
-
lamp MWI.
Refer to the Configuration volume, Slots Table chapter, for more
information on configuring the SLOTS Table.
COS Attribute 15 — TRANSFER TO A RINGING EXTENSION
Assign a COS with Attribute 15 to mailboxes of extensions which the
System 75 forwards to the Octel 200/300.
INFORMATION Table Index 25 — QUICK GREETING
ACTIVATION
Modify Information Table Index 25 to YES to allow selected direct
internal callers to change and turn ON/OFF their personal greetings
without first entering their mailboxes.
PB60019-01