Avaya Octel 200 Installation And Maintenance Manual page 239

7. EXTERNAL TRUNK CALL TO THE OCTEL 200/300 SYSTEM
This test verifies that the Octel 200/300 correctly processes calls from trunks that have been
auto-terminated to the extension of the hunt group EXTNH. Be sure to test all such trunk
groups.
.
a.
b. From the terminal connected to Octel 200/300 enter the P S command. Does the port that
c.
d. Repeat steps a. through c. for each Octel 200/300 port until all of the ports are busied out. This
8. EXTERNAL CALL — FAIL-SAFE OPERATION FOR ATTIC
This test verifies that the Octel 200/300 can answer a trunk call.
a.
b. Does the call overflow to the correct destination?
c.
9. EXTERNAL CALL TO A RING-NO-ANSWER EXTENSION
This test verifies that the Octel 200/300 correctly processes an external call that reaches a
ring-no-answer (RNA) extension.
a.
b. Enter the extension of phone B. Does the Octel 200/300 respond with "Thank you, just a
PB60019-01
1-800 (InWATS) lines can be tested individually, even if they are bands from other areas, by
using plant test numbers. Get these numbers from the CO if you do not already know them.
From phone A, call outside of the PBX and back in on a trunk that terminates at the Octel
200/300 Does the Octel 200/300 answer with the proper greeting?
NO Determine the cause and correct the problem before continuing.
'
answered show WFD state?
NO Determine the cause and correct the problem before continuing.
'
Press to exit the Octel 200/300 From the Octel 200/300 terminal, busy out the Octel
9 9
200/300 port that answered the call. Use the command TE C 1 x, in which x is the port
number.
is to confirm that calls can be placed to the Octel 200/300 on each port.
With all ports still busied out, call outside of the PBX and back in on a trunk that
auto-terminates to Link 1.
NO Determine the cause and correct the problem before continuing.
'
From the Octel 200/300 terminal, use the command TE C 2 to release all Octel 200/300
ports from the FWD condition.
From phone A, call outside of the PBX and back in on a trunk that auto-terminates at the
Octel 200/300 Does the Octel 200/300 answer properly?
NO Determine the cause and correct the problem before continuing.
'
moment..."? Does phone B start ringing?
NO Correct the problem before continuing.
'
AT&T System 75/Definity G1 Adaptive Integration 7.2-43
Octel 200/300 S.4.1