Table of Contents
Advertisement
Mailbox COS
INFORMATION Table
Port COS
SLOTS Table
PB60019-01
COS Attribute 15 — TRANSFER TO A RINGING EXTENSION
Assign a COS with Attribute 15 to mailboxes of extensions which the
System 75 forwards to the Octel 200/300.
INFORMATION Table Index 25 — QUICK GREETING
ACTIVATION
Modify Information Table Index 25 to YES to allow selected direct
internal callers to change and turn ON/OFF their personal greetings
without first entering their mailboxes.
COS Attribute 58 — DO NOT USE THIS PORT FOR
INTEGRATION
Assign this COS attribute to those Octel 200/300 ports used in special
applications that do not require integration.
The SLOTS Table is used to configure both Line Interface Cards (LICs)
and Integration Cards.
Line Interface Cards
ANSWERING MODE — With DEFINITY G3i Adaptive Integration,
all ports can be configured for AX answering mode to maximize
utilization of the Octel 200/300 ports.
CONFIGURATION OF PORTS FOR OUTCALL — To maximize
system performance and port usage, all Octel 200/300 ports should be
configured for outcall. If this is not possible, the higher numbered ports
should be configured for outcall. For example, in an eight-port system,
ports 3−8 should be configured for outcall.
All ports defined as YES are used for outcalls, with no restrictions.
Integration Cards
Configure each unit of each integration card, as needed, for the
following:
Card Type
-
Integration Unit Number
-
Integration
-
Assign all ports to be integrated as line appearances for all units
doing call processing.
Assign links for message waiting indication. Refer to Changes for
message waiting indication section.
Refer to the Configuration volume, SLOTS Table, for further
information on configuring the SLOTS Table.
DEFINITY G3 Adaptive Integration
Octel 200/300
7.1-27
S.4.1
Advertisement
Chapters
Table of Contents
