Avaya Octel 200 Installation And Maintenance Manual page 293

c. Does the Octel 200/300 answer properly?
NO
.
d. Enter the extension number of phone C. Does the Octel 200/300 respond with "Thank you, just
a moment..."? The Octel 200/300 should respond with "Extension EXT-C is busy/unavailable.
Please leave a message at the tone, enter another extension number, or press zero for
assistance."
e. Leave a test message for phone C.
.
f. Does the Octel 200/300 light the message waiting indicator on phone C?
.
NO
g. From phone C, call the Octel 200/300 and log into mailbox C. The Octel 200/300 should
respond with "you have one message. Ready."
h. Listen to the test message. Does the message sound clear?
NO
i. Press
with "One message will be erased" ? Press
respond with "Good-bye." ?
NO '
j. Hang up phone C. Is the message waiting indicator turned OFF?
.
NO
10B. MESSAGE WAITING FOR SYSTEMS NOT USING MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting notification for systems not using
Message Waiting Indication.
.
a. Make phone C appear busy by taking it off-hook.
b. From phone A, call the Octel 200/300.
PB60019-01
Determine the cause and correct the problem before continuing.
'
You may prefer to use the Quick Message feature to leave a message for phone C instead
of following the instructions in step d. and step e.
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. Leave a
test message approximately 15−20 seconds in length to ensure a valid message. The
mailbox for phone C must be entered in the USER Table or the Octel 200/300 does not
offer to take a message.
It may take several seconds for the indicator to turn ON.
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
to erase the message. Press
3
Any of the above, determine the cause and correct the problem before continuing.
It may take several seconds for the indicator to turn OFF.
Determine the cause and correct the problem before continuing.
'
Verify that COS 9 is not set.
AT&T System 85/Definity G2 Adaptive Integration
to exit the mailbox. Does the Octel 200/300 respond
9
to exit the system. Does the Octel 200/300
9
7.3-39
Octel 200/300 S.4.1