Avaya Octel 200 Installation And Maintenance Manual page 701

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

b. From the terminal connected to the Octel 200/300, enter the PS command. Does the port that
answered show WFD state?
NO
c.
Enter
d. From the Octel 200/300 terminal, busy out the APIC port that answered the call. Use the
command
TE C 1 x
where x is the port number.
e.
Repeat steps a. through d. for each Octel 200/300 port until all of the ports are busied out.
This is to confirm that each Octel 200/300 port can answer a trunk call.
8. EXTERNAL CALL — FAIL-SAFE OPERATION FOR APIC
This test verifies that each port can answer a trunk call.
a.
With all ports still busied out, call outside of the PBX and back in on a trunk that
auto-terminates to the Octel 200/300 hunt group.
b. Does the call overflow to the correct destination?
NO
c.
Release all Octel 200/300 ports from the FWD condition. From the Octel 200/300 terminal,
enter
TE C 2
9. EXTERNAL CALL TO A RING-NO-ANSWER EXTENSION
This test verifies that the Octel 200/300 correctly processes an external call that reaches a
ring-no-answer (RNA) extension.
a.
From phone A, call outside of the PBX and back in on a trunk that auto-terminates to the Octel
200/300. Does the Octel 200/300 answer with the greeting configured for the trunk?
NO
b. Call the extension of phone B. Does the Octel 200/300 respond with, "Thank you, just a moment.
. ." Does phone B start ringing?
NO
Do not answer phone B. After the number of rings specified for RNA in phone B's coverage
path, does the Octel 200/300 respond with, "Extension EXTB is unavailable. Please leave a
message at the tone. . . "?
NO
c.
Enter
PB60019-01
Determine the cause, and correct the problem before continuing.
'
to exit the Octel 200/300.
9
9
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
Determine the cause, and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone A.
9
9
Definity G3 Adaptive Integration with APIC
Octel 200/300
12.1-39
S.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents