Avaya Octel 200 Installation And Maintenance Manual page 953

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

domain digital, 1−7
remote digital, 1−7
protocol 2, INSTALL program, 1-14
protocol 4, INSTALL program, 1-14
protocols 1 and 3, INSTALL program, 1-14
redundancy for network messages, 2−4, 8−10
Night mode, 3-13
Northern Telecom Adaptive Integration with NPIC,
13-1–13-31
Called Party Identification
direct calls from external trunks, 13-2
direct internal call, 13-3
forwarded external calls (RNA or busy), 13-2
forwarded internal calls, 13-3
hardware requirements, 13-5
installation, 13-1–13-31
PBX configuration, 13-6–13-15
customer datablock, 13-7
customer telephones, 13-12
incoming trunks, 13-6
PBX requirements, 13-5
software requirements, 13-5
Northern Telecom SL-1 Integration Card (SLIC), 2-8
NPIC
See also Northern Telecom Adaptive Integration
with NPIC; Serial Integration Card
pin assignment, 4−44
Number of digits to strip, NUMBERING PLAN
Table, 12−3, 12−10, 12−14
Number of digits to strip from self, NUMBERING
PLAN Table, 12−3, 12−10, 12−14
Numbering plan problems, digital networking, 8−64
NUMBERING PLAN Table, 1-14, 12−1–12−16
collocated analog networking, 7−11–7−14,
12−13–12−16
how it is used, 12−13
how to configure, 12−13
initial digits expected, 12−14
network location name, 12−13
network mailbox length, 12−14
number of digits to strip, 12−14
number of digits to strip from self, 12−14
using INSTALL, 12−14
using UPDATE, 12−14
digital networking, 8−8, 8−41–8−42, 12−9–12−12
ADD command, 8−42
how it is used, 12−9
how to configure, 12−9
initial digits expected, 12−9
network location name, 12−9
network mailbox length, 12−10
number of digits to strip, 12−10
number of digits to strip from self, 12−10
using INSTALL, 12−10
PB60019-01
Installation and Maintenance Manual Master Index
using UPDATE, 12−10
remote analog networking, 12−2–12−8
how it is used, 12−2
how to configure, 12−2
initial digits expected, 12−3
network location name, 12−3
network mailbox length, 12−3
number of digits to strip, 12−3
number of digits to strip from self, 12−3
using INSTALL, 12−4
using UPDATE, 12−4
NUMBERING PLAN Table form
collocated analog networking, 7−12
initial digits, 7−14
location name, 7−14
network mailbox length, 7−14
number of digits to strip, 7−14
number of digits to strip from SELF, 7−14
sample, 7−13
remote analog networking, 3−14–3−15, 11–12,
6−13–6−14
sample, remote analog networking, 2−34, 3−15,
4−14, 12, 6−14
O
OCC. See Option Control Chip
Octel Private MIB, 11C-1–11C-13
listing, 11C-2
sample session for obtaining from Internet, 11C-1
Octel supplied password, 4−16
OctelAccess Server
exportnames command, 6-10
GWLSTAT command, 6-11
log, server activity trace, 7-50
OctelNet, 2−2
See also Remote analog networking, OctelNet;
Remote analog networking, Protocol 5
embed autocopy, 11−6
embedded name, 11−6
fax feature, 6−3
serial number, 11−6
system mailbox, COS attributes, 6−5
Offsite
dial system parameter digits index, INSTALL
program, 1-21
end with sysp digits, INSTALL program, 1-21
prefix digits index, INSTALL program, 1-20
speak delay index, INSTALL program, 1-20
speak times index, INSTALL program, 1-20
Operating Line Voltage, 4−3
Operating system, command, 4−24
In-17
Octel 200/300 S.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents