Table of Contents
Advertisement
Testing Adaptive Integration Features
This section describes the procedures for testing Adaptive Integration features. Once the MIC board is
installed and operational and the PBX cables are connected to the correct slots, continue with the
procedures listed below.
1. TESTING THE OCTEL 200/300 PORTS
This test verifies that all PBX Octel 200/300 port extensions are connected to the correct Octel
200/300 ports.
a.
On the Octel 200/300 terminal, enter
L T
and select
1. ALL ACTIVITIES.
and C for continuous display.
b. From phone A, call the extension of the Octel 200/300 port 1. Does the Octel 200/300 answer
with "To enter your mailbox, press pound"?
NO
If the system activity trace does not show that the correct port answered, change the port
connections to correct the problem.
c.
Repeat step b. for each of the MIC ports.
2. CONFIGURING THE OCTEL 200/300 FOR TEST
Before proceeding, make the following changes to the Octel 200/300 configuration. These
changes are temporary; they are required only for testing.
a.
Add an Octel 200/300 mailbox that has a mailbox number matching the extension number for
phone B. This mailbox is referred to as mailbox B.
b. Assign these attributes to the COS for mailbox B:
Attribute 9
Attribute 15 — TRANSFER TO RINGING
c.
Add a second Octel 200/300 mailbox that has a mailbox number matching the extension number
for phone A. This is referred to as mailbox A. No attributes should be assigned to the COS for
mailbox A.
d. Be sure that the ring-no-answer count specified by INFORMATION Table Index 7 for mailbox B
is small enough to be shorter than the duration specified by the Mitel SX-100/SX-200 Analog
System Option for Call Forwarding Don't Answer Time-out.
3. DIRECT INTERNAL CALL TO THE OCTEL 200/300
This test verifies that the Octel 200/300 processes a direct internal call correctly.
a.
From phone A, call the extension number for the Octel 200/300 access, that is, the access
number of the MIC ports' hunt group. Does the Octel 200/300 answer with, "To enter your
mailbox press pound. . . "?
NO
b. Enter
PB60019-01
Correct the problem before continuing.
'
— MESSAGE WAITING LAMP (message waiting indication only)
Determine the cause and correct the problem before continuing.
'
to exit from the Octel 200/300 and hang up phone A.
9
9
Mitel SX-100/SX-200 Analog Adaptive Integration
10.2-27
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
