Changes For Called Party Identification - Avaya Octel 200 Installation And Maintenance Manual

7.1-26 Integration Volume
Mailbox COS
System Parameters
SLOTS Table

Changes for Called Party Identification

To configure the Octel 200/300 with called party identification on a System 75, the following
configuration changes must be made through the UPDATE program.
Caution!
Octel 200/300 S.4.1
COS Attribute 9 — LAMP OR DISPLAY PHONE MESSAGE
WAITING
For message waiting indication only, assign a COS with Attribute 9 to
those mailboxes that correspond to extensions that should have message
waiting indication.
System Parameter 3 — PBX MODEL
Select the model number of the telephone system. For DEFINITY G3i,
select 3 (ATT).
System Parameter 116 — SHOULD INTEGRATION BE
ACTIVATED?
Modify System Parameter 116 to be YES.
.
Only one default must be defined for message waiting to
operate correctly.
System Parameter 170 — INTEGRATION LAMP ON/OFF LINK
MUST MATCH
Modify System Parameter 170 to be YES.
Each link for MWI must be programmed as a default or with a specific
COS number.
For each integration unit configured with one or more message waiting
links, the following is also configured:
Whether the link is enabled to perform lamp message waiting
-
indication (MWI).
Whether the link is used as the system default for MWI.
-
.
Only one default must be defined for message waiting to
operate correctly.
Specific COS or ranges of COS for which the link is to perform
-
lamp MWI.
Refer to the Configuration volume, SLOTS Table, for more information
on configuring the SLOTS Table.
Mailbox and extension numbers must match for
message waiting indication to operate correctly.
PB60019-01