Table of Contents
Advertisement
8.2-26 Integration Volume
13. VERIFYING TRUNKS (For new install)
a.
From phone A, call outside the PBX and back in on the first trunk dedicated to the Octel
200/300.
b. Does the Octel 200/300 answer properly?
YES
NO
c.
Repeat the procedure from step a. for each trunk until all trunks have been tested. Verify that
each trunk is answered by the Octel 200/300 with the correct greeting.
14. CALLS TO THE INTERCEPT EXTENSION (For new install)
This test verifies that the Octel 200/300 can transfer a call to the intercept position (attendant)
when the caller does nothing or presses
a.
From phone A, call outside of the PBX and back in on a trunk dedicated to the Octel 200/300
b. Does the Octel 200/300 answer correctly?
c.
Listen to the complete company greeting. Press
d. Did you reach the correct intercept position?
YES
NO
e.
From phone A, call out and back in on a trunk directed to the hunt group. When the Octel
200/300 answers, let the system time out (do not enter any digits).
f.
Does the Octel 200/300 transfer the call to the appropriate intercept position?
YES
NO
15. MESSAGE WAITING
a.
From phone A, call out and back in on a trunk dedicated to the Octel 200/300.
b. Does the Octel 200/300 answer properly?
YES
NO
Octel 200/300
S.4.1
Continue.
'
Determine the cause and correct the problem before continuing.
'
.
1-800 lines can be tested individually, even if they are bands from other areas, by using
the plant test number. Get these from the CO if you do not already know them.
Continue for all ports.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
.
0
.
0
PB60019-01
Advertisement
Chapters
Table of Contents
