Avaya Octel 200 Installation And Maintenance Manual page 565

Message servers
Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

Port COS
INFORMATION Table
SLOTS Table
System Parameters
PB60019-01
200/300. If individuals set Station Call Forwarding to a
destination other than the Octel 200/300, those individuals may
not receive proper Octel 200/300 call coverage.
COS Attribute 58 — DO NOT USE THIS PORT FOR
INTEGRATION
If there are any line cards in the Octel 200/300 that are not MICs, or if
some special application requires that a MIC port operate in a
non-integrated mode, use this COS attribute to distinguish these ports
from the integrated MIC ports.
INFORMATION Table Index 25 — QUICK GREETING
ACTIVATION
Modify INFORMATION Table Index 25 to YES to allow selected direct
internal callers to be able to change and turn ON/OFF their personal
greetings without first entering their mailboxes.
ANSWERING MODE
With SX-2000 Adaptive Integration, all integrated ports should be
configured for AX answering mode to maximize utilization of the Octel
200/300 ports.
CONFIGURATION OF PORTS
Set port testing to YES for all MIC ports. To maximize system
performance and port usage, all the Octel 200/300 call processing ports
should be configured for outcall.
System Parameter 13 — TRANSFER INITIATE CODE
RECONNECT CODE AFTER NO ANSWER
RECONNECT CODE AFTER BUSY
RECONNECT CODE AFTER FAST BUSY
TRANSFER COMPLETE CODE
Modify the value of Transfer Initiate Code to be FE. Modify the value
of all Reconnect Codes to be F, and modify the value of Transfer
Complete Code to be NONE.
.
If the Octel 200/300 uses line interface cards and MICs for call
processing, modify the value of all reconnect codes to be the
PBX feature code for Call Hold-Retrieve.
System Parameter 16 — ALTERNATE TRANSFER INITIATE
CODE
ALTERNATE RECONNECT CODE AFTER NO ANSWER
ALTERNATE RECONNECT CODE AFTER BUSY
ALTERNATE RECONNECT CODE AFTER FAST BUSY
ALTERNATE TRANSFER COMPLETE CODE
If Alternate Transfer Codes are required, configure them according to
the specific application. After answering a call, the MIC firmware
Mitel SX-2000 Adaptive Integration
Octel 200/300
10.3-21
S.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octel 300

Table of Contents