Avaya Octel 200 Installation And Maintenance Manual page 400

8.2-10 Integration Volume
Create Analog Voice Ports
Create the analog (SLMA) voice ports. Use the AMO, ADDSCSU.
Field
ADDSCSU:
STNO:
PEN:
DPLN:
ITR:
COS1:
COS2:
COSX:
PUBSCR:
NYTPE:
ACTCDE:
HTLNIDX:
DEVFUNC:
LCRCOSV1:
LCRCOSV2:
Create Name for Analog Ports
Create the name for Analog Ports. Use the AMO, ADDPERSI
Field
ADDPERSI:
TYPE:
STNO:
NAME:
PINM:
COSXCD:
ORG:
RSTRCPIN:
Add Prime Line
Add the prime line to the ROLMphone 400. Use the AMO, ADDKCSU.
Field
ADDKASU:
STNO:
TYPE:
PRIMEKEY:
RIOP:
ORLNPF:
TMLNPF:
SGLBMOD:
ABRING:
APRIVAT:
INS:
Octel 200/300 S.4.1
Set To
Station number
Port equipment number
0
0
Assign a standard class of service
Assign a standard class of service
Blank
CO prefix and station number
NAT
Blank
Blank
ANATE (or EXTVML if Rel. 6.2 bind KV 19 is installed)
0
0
Set To
STN
Station Number
VMPORT (This should be the same for all ports)
Set To
Prime number
KEY
9
Y
LAST
RING
Y
N
N
Y
PB60019-01