Table of Contents
Advertisement
e.
Is the phone B message waiting indicator OFF?
NO
f.
Hang up to Superset 4.
NO
7. DISPLAY TEST FOR DIRECT CALLS
This test verifies that the MIC ports receive the proper display information from the PBX for
direct internal and direct external calls.
a.
Using phone A, call out of the PBX and back in on the trunk that terminates at the Superset 4.
b. Look at the Superset 4 display. The display should contain this information:
T999
If the display does not contain this information, determine the cause and correct the problem
before continuing.
c.
Hang up phone A.
d. Using phone A again, enter the extension number of the Superset 4.
e.
Look at the Superset 4 display. The display should contain this information:
XXX CALLING
XXX is the extension of phone A.
If the display does not contain this information, determine the cause and correct the problem
before continuing.
f.
Hang up phone A.
8. DISPLAY TEST FOR FORWARDED CALLS ON RING-NO-ANSWER
This test verifies that the MIC ports receive the proper display information from the PBX for
calls forwarded from an unanswered extension.
Internal Call Forwarded on Ring-No-Answer
a.
Make sure phone B is on-hook.
b. Using phone A, call the extension of phone B. Does phone B ring?
NO
c.
After the duration specified by the phone B's Call Forward No Answer timer, does the call
forward to the Superset 4?
NO
d. Look at the display of the Superset 4. The display should contain this information:
CFNA:
XXX is the extension of phone B.
PB60019-01
Determine the cause and correct the problem before continuing.
'
Determine the cause and correct the problem before continuing.
'
TEST
Correct the problem before continuing.
'
Correct the problem before continuing.
'
XXX
Mitel SX-2000 Adaptive Integration
Octel 200/300
10.3-31
S.4.1
Advertisement
Chapters
Table of Contents
