Renault Laguna III Manual page 2125

FRONT AXLE COMPONENTS
Hydraulic unit - front right-hand calliper brake pipe: Removal - Refitting
a Detach the brake pipe.
a Undo:
- the brake pipe union (2) on the right-hand side re-
taining bracket,
- the brake pipe union (3) on the hydraulic unit.
a Remove:
- the rear suspended engine mounting (see 19D,
Engine mounting, Suspended engine mount-
ing),
- the linkage reinforcing bracket.
- the brake pipe.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the brake pipe,
- the engine subframe retaining tie rod.
a Torque tighten:
- the brake pipe unions (14 Nm),
- the engine subframe tie rod bolts (62 Nm).
a Attach the brake pipe.
II - FINAL OPERATION.
119760
M9R
a Refit the air resonator.
a Refit:
- the front left-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416
Bodywork, 55A, Exterior protection),
- the engine undertray,
- the front left-hand wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) ,
- the air filter box air outlet pipe,
- the battery tray (see 80A, Battery, Battery tray:
Removal - Refitting),
- the engine compartment connection unit,
19109
- the battery (see 80A, Battery, Battery: Removal -
Refitting).
a Unlock the airbag computer to lock the steering col-
umn using the Diagnostic tool (see Airbag and
pretensioners: Precautions for the repair) (MR
417 Fault finding, 88C, Airbags and pretensioners).
a Remove the pedal press
a Perform the following operations:
- fill up with brake fluid,
- bleed the circuit (see 30A, General information,
Braking circuit: Bleed, page 30A-4) .
31A-27
31A