Renault Laguna III Manual page 2137

FRONT AXLE COMPONENTS
Front hub carrier bearing: Removal - Refitting
K4M or K9K
a Remove the wheel speed sensor bolt (1) .
a Remove the wheel speed sensor from its housing.
a Unclip:
- the wheel speed sensor wiring at (2) ,
- the brake hose from the shock absorber at (3) .
a Remove the brake calliper mounting bolts (4) .
a Hang the "front brake calliper mounting - front brake
calliper" assembly on the suspension spring.
a Remove:
- the front brake disc (see 31A, Front axle compo-
nents, Front brake disc: Removal - Refitting,
page 31A-16) ,
- the front driveshaft hub carrier (see 31A, Front
axle components, Front driveshaft hub carrier:
Removal - Refitting, page 31A-28) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
122721
a Remove the hub with a press, applying pressure
with a tube with an outer diameter of 43 mm.
122719
31A-39
31A
20786