Renault Laguna III Manual page 2131

FRONT AXLE COMPONENTS
Front driveshaft hub carrier: Removal - Refitting
F4R or M4R or M9R or V4Y or V9X
Special tooling required
Rou. 604-01 Hub locking tool.
Tav. 476 Ball joint extractor.
Tightening torquesm
ball joint protector bolt
brake disc protector
bolts
lower ball joint nut
lower shock absorber
bolts
track rod end nut
hub nut
brake calliper mounting
bolts
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair:
- (see 31A, Front axle components, Front axle
components: Precautions for the repair, page
31A-1) ,
- (see Vehicle: Precautions for the repair) (01D,
Mechanical introduction).
WARNING
In order not to damage the brake hose:
- do not tension the hose,
- do not twist the hose,
- check that there is no contact with the surrounding
components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the front wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) .
8 N.m
8 N.m
62 N.m
180 N.m
37 N.m
150 N.m
105 N.m
31A-33
31A