Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2232

•
Software and hardware resources are allocated for rules associated with a validity period even if the
validity period is not active. Pre-allocating the resources makes sure the rule can be enforced when the
validity period becomes active.
•
If the snapshot command is entered after the policy validity period command is configured, the
resulting ASCII file will include the following additional syntax for the policy validity period
command:
from {cli | ldap | blt}
This syntax indicates how the service was created. The cli and ldap options may be changed by a user
modifying the ASCII file; however, changing this setting is not recommended. The blt option indicates
a built-in object, this setting is not configurable.
Examples
-> policy validity period vp01 days tuesday thursday months january february
-> policy validity period vp01 hours 13:00 to 19:00
-> policy validity period vp02 interval 01/01/05 12:01 to 02/01/05 11:59
-> policy validity period vp01 no days thursday
-> no policy validity period vp02
Release History
Release 6.1; command was introduced.
Related Commands
policy rule
show policy validity period
page 33-12
Configures a policy rule on the switch and optionally associates that rule
with a validity period.
Displays information about policy validity periods.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012