Display Ntp-Service Status - H3C S5120-SI Series Command Reference Manual

sync state
precision
version
peer interface
reftime
orgtime
rcvtime
xmttime
filter delay
filter offset
filter disper
Total associations
When a device is working in the NTP broadcast/multicast server mode, the display ntp-service
sessions command executed on the device will not display the NTP session information corresponding
to the broadcast/multicast server, but the sessions will be counted in the total number of associations.

display ntp-service status

Syntax
display ntp-service status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ntp-service status command to view the NTP service status information.
Field
State of the state machine
The displayed value is an integral that ranges from 0 to 5.
Precision of the system clock
NTP version
The displayed value is an integral that ranges from 1 to 3.
Source interface
If the source interface is not specified, this field will be
wildcard.
Reference timestamp in the NTP message
Originate timestamp in the NTP message
Receive timestamp in the NTP message
Transmit timestamp in the NTP message
Delay information
Offset information
Dispersion information
Total number of associations
Description
1-5