Siemens SINAMICS G120D List Manual page 508

Parameters
List of parameters
p20222 NSW 0 run sequence / NSW 0 RunSeq
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
0
Description: Setting parameter for the run sequence of instance NSW 0 within the run-time group set in p20221.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20223[0...1] CI: NSW 1 inputs / NSW 1 inputs
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source of input quantities X0 and X1 of instance NSW 1 of the numeric changeover switch.
Index: [0] = Input X0
[1] = Input X1
p20224 BI: NSW 1 switch setting I / NSW 1 sw_setting
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source of the switch setting I of instance NSW 1 of the numeric changeover switch.
r20225 CO: NSW 1 output Y / NSW 1 output Y
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for output quantity Y of instance NSW 1 of the numeric changeover switch.
p20226 NSW 1 run-time group / NSW 1 RTG
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
5
Description: Setting parameter for the run-time group in which the instance NSW 1 of the numeric changeover switch is to be
called.
Value: 5:
6:
9999: Do not calculate
1-508
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7250
Factory setting
610
Data type: U32 / FloatingPoint32
Dyn. index: -
Func. diagram: 7250
Factory setting
0
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7250
Factory setting
0
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 7250
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7250
Factory setting
9999