Download Print this page

Siemens SINAMICS G120D List Manual page 398

Hide thumbs Also See for SINAMICS G120D:

Advertisement

Parameters
List of parameters
r8932[0...3]
PN Default Gateway of Station active / PN Def Gateway act
CU240D-2_PN
Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Units group: -
Min
0
Description:
Displays the active default gateway for the onboard PROFINET interface on the Control Unit.
r8933[0...3]
PN Subnet Mask of Station active / PN Subnet Mask act
CU240D-2_PN
Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Units group: -
Min
0
Description:
Displays the active subnet mask for the onboard PROFINET interface on the Control Unit.
r8935[0...5]
PN MAC Address of Station / PN MAC of Station
CU240D-2_PN
Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Units group: -
Min
0000 hex
Description:
Displays the MAC address for the onboard PROFINET interface on the Control Unit.
r8939
PN DAP ID / PN DAP ID
CU240D-2_PN
Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Units group: -
Min
-
Description:
Displays the PROFINET Device Access Point ID (DAP ID) for the onboard PROFINET interface.
The combination of device ID (r8909) and DAP ID uniquely identifies a PROFINET access point.
Note:
List of the SINAMICS DAP IDs:
20007 hex: CBE20 V4.5
20008 hex: CBE20 V4.6
20107 hex: CU310-2 PN V4.5
20108 hex: CU310-2 PN V4.6
20307 hex: CU320-2 PN V4.5
20308 hex: CU320-2 PN V4.6
20407 hex: CU230P-2 PN /CU240x-2 PN V4.5
20408 hex: CU230P-2 PN /CU240x-2 PN /CU250S-2 PN /G110M PN V4.6
20507 hex: CU250D-2 PN V4.5
20508 hex: CU250D-2 PN V4.6
1-398
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
00FF hex
Calculated: -
Scaling: -
Unit selection: -
Max
-
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-

Advertisement

loading

This manual is also suitable for:

Cu240d-2Cu250d-2Cu240d-2 dpCu240d-2 dp fCu240d-2 pnCu240d-2 pn f ... Show all