Siemens SINAMICS G120D List Manual page 504

Parameters
List of parameters
r20205 BO: DFR 1 inverted output QN / DFR 1 inv outp QN
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for the inverted output QN of instance DFR 1 of the D flipflop.
p20206 DFR 1 run-time group / DFR 1 RTG
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
1
Description: Setting parameter for the run-time group in which instance DFR 1 of the D flipflop is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20207 DFR 1 run sequence / DFR 1 RunSeq
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
0
Description: Setting parameter for the run-time group of instance DFR 1 within the run-time group set in p20206.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20208[0...1] BI: BSW 0 inputs / BSW 0 inputs
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source of input quantities I0 and I1 of instance BSW 0 of the binary changeover switch.
Index: [0] = Input I0
[1] = Input I1
1-504
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7240
Factory setting
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7240
Factory setting
560
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7250
Factory setting
0