Siemens SINAMICS G120D List Manual page 497

p20172 PDF 0 run sequence / PDF 0 RunSeq
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
0
Description: Setting parameter for the run sequence of instance PDF 0 within the run-time group set in p20171.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20173 BI: PDF 1 input pulse I / PDF 1 inp_pulse I
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source for the input pulse I of instance PDF 1 of the breaking delay device.
p20174 PDF 1 pulse extension time in ms / PDF 1 t_ext ms
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
0.00
Description: Setting parameter for pulse extension time T in milliseconds of instance PDF 1 of the breaking delay device.
r20175 BO: PDF 1 output Q / PDF 1 output Q
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for output pulse Q of instance PDF 1 of the breaking delay device.
p20176 PDF 1 run-time group / PDF 1 RTG
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
5
Description: Setting parameter for the run-time group in which the instance PDF 1 of the breaking delay device is to be called.
Value: 5:
6:
9999: Do not calculate
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
5400000.00
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Parameters
List of parameters
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7233
Factory setting
460
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7233
Factory setting
0
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 7233
Factory setting
0.00
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7233
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7233
Factory setting
9999
1-497