Siemens SINAMICS G120D List Manual page 274

Parameters
List of parameters
p2103[0...n] BI: 1. Acknowledge faults / 1. Acknowledge
CU250D-2_DP_F Access level: 3
CU250D-2_PN_F
Can be changed: U, T
Units group: -
Min
-
Description: Sets the first signal source to acknowledge faults.
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
Note: A fault acknowledgement is triggered with a 0/1 signal.
p2104[0...n] BI: 2. Acknowledge faults / 2. Acknowledge
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: U, T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the second signal source to acknowledge faults.
Note: A fault acknowledgement is triggered with a 0/1 signal.
p2104[0...n] BI: 2. Acknowledge faults / 2. Acknowledge
CU250D-2_DP_F Access level: 3
CU250D-2_PN_F
Can be changed: U, T
Units group: -
Min
-
Description: Sets the second signal source to acknowledge faults.
Note: A fault acknowledgement is triggered with a 0/1 signal.
p2105[0...n] BI: 3. Acknowledge faults / 3. Acknowledge
Access level: 3
Can be changed: U, T
Units group: -
Min
-
Description: Sets the third signal source to acknowledge faults.
Note: A fault acknowledgement is triggered with a 0/1 signal.
1-274
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2441, 2442, 2443,
2447, 2475, 2546, 9220, 9677, 9678
Factory setting
[0] 722.2
[1] 0
[2] 0
[3] 0
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546, 8060
Factory setting
[0] 722.2
[1] 0
[2] 0
[3] 0
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546, 8060
Factory setting
0
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546, 8060
Factory setting
0