Siemens SINAMICS G120D List Manual page 528

Parameters
List of parameters
p20329[0...3] BI: DFR 2 inputs / DFR 2 inputs
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source for trigger input I, D input D, set input S, and reset input R of instance DFR 2 of the D flipflop.
Index: [0] = Trigger input I
[1] = D input D
[2] = Set S
[3] = Reset R
r20330 BO: DFR 2 output Q / DFR 2 output Q
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for output Q of instance DFR 2 of the D flipflop.
r20331 BO: DFR 2 inverted output QN / DFR 2 inv outp QN
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for the inverted output QN of instance DFR 2 of the D flipflop.
p20332 DFR 2 run-time group / DFR 2 RTG
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
1
Description: Setting parameter for the run-time group in which instance DFR 2 of the D flipflop is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
1-528
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7240
Factory setting
0
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7240
Factory setting
9999