Siemens SINAMICS G120D List Manual page 550

Parameters
Command and drive data sets - overview
p0367[0...n]
p0368[0...n]
p0369[0...n]
r0370[0...n]
r0372[0...n]
r0373[0...n]
r0374[0...n]
r0376[0...n]
r0377[0...n]
r0378[0...n]
r0382[0...n]
r0384[0...n]
r0386[0...n]
r0395[0...n]
r0396[0...n]
p0397[0...n]
p0601[0...n]
p0604[0...n]
p0605[0...n]
p0606[0...n]
p0607[0...n]
p0610[0...n]
p0611[0...n]
p0612[0...n]
p0614[0...n]
p0615[0...n]
p0620[0...n]
p0621[0...n]
p0622[0...n]
p0625[0...n]
p0626[0...n]
p0627[0...n]
p0628[0...n]
r0630[0...n]
r0631[0...n]
r0632[0...n]
r0633[0...n]
p0634[0...n]
p0635[0...n]
p0636[0...n]
p0637[0...n]
p0650[0...n]
p0651[0...n]
p0826[0...n]
p1231[0...n]
p1232[0...n]
p1233[0...n]
p1234[0...n]
p1909[0...n]
p1980[0...n]
p1999[0...n]
r3926[0...n]
1-550
Motor saturation characteristic I_mag 2 / Mot sat. I_mag 2
Motor saturation characteristic I_mag 3 / Mot sat. I_mag 3
Motor saturation characteristic I_mag 4 / Mot sat. I_mag 4
Motor stator resistance cold / Mot R_stator cold
Cable resistance / Mot R_cable
Motor rated stator resistance / Mot R_stator rated
Motor rotor resistance cold / Mot R_r cold
Rated motor rotor resistance / Mot R_rotor rated
Motor leakage inductance total / Mot L_leak total
Motor stator inductance d axis / Mot L_stator d
Motor magnetizing inductance transformed / Mot L_magn transf
Motor rotor time constant / damping time constant d axis / Mot T_rotor/T_Dd
Motor stator leakage time constant / Mot T_stator leak
Actual stator resistance / R_stator act
Actual rotor resistance / R_rotor act
Angle magnetic decoupling maximum angle / Magn decpl max_ang
Motor temperature sensor type / Mot_temp_sens type
Mot_temp_mod 2/KTY alarm threshold / Mod 2/KTY A thresh
Mot_temp_mod 1/2 threshold / Mod 1/2 threshold
Mot_temp_mod 2/KTY timer / Mod 2/KTY t_timer
Temperature sensor fault timer / Sensor fault time
Motor overtemperature response / Mot temp response
I2t motor model thermal time constant / I2t mot_mod T
Mot_temp_mod activation / Mot_temp_mod act
Thermal resistance adaptation reduction factor / Therm R_adapt red
Mot_temp_mod 1 (I2t) fault threshold / I2t F thresh
Thermal adaptation, stator and rotor resistance / Mot therm_adapt R
Identification stator resistance after restart / Rst_ident Restart
Motor excitation time for Rs_ident after powering up again / t_excit Rs_id
Motor ambient temperature / Mot T_ambient
Motor overtemperature, stator core / Mot T_over core
Motor overtemperature, stator winding / Mot T_over stator
Motor overtemperature rotor winding / Mot T_over rotor
Mot_temp_mod ambient temperature / Mod T_ambient
Mot_temp_mod stator iron temperature / Mod T_stator
Mot_temp_mod stator winding temperature / Mod T_winding
Mot_temp_mod rotor temperature / Mod T_rotor
Q flux flux constant unsaturated / PSIQ KPSI UNSAT
Q flux quadrature axis current constant unsaturated / PSIQ KIQ UNSAT
Q flux direct axis current constant unsaturated / PSIQ KID UNSAT
Q flux flux gradient saturated / PSIQ Grad SAT
Actual motor operating hours / Mot t_oper act
Motor operating hours maintenance interval / Mot t_op maint
Motor changeover motor number / Mot_chng mot No.
DC braking configuration / DCBRK config
DC braking braking current / DCBRK I_brake
DC braking time / DCBRK time
Speed at the start of DC braking / DCBRK n_start
Motor data identification control word / MotID STW
PolID technique / PolID technique
Ang. commutation offset calibr. and PollD scaling / Com_ang_offs scal
Voltage generation alternating base voltage amplitude / U_gen altern base
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013