Siemens SINAMICS G120D List Manual page 393

r7843[7] = 0 dec --> ASCII characters = " " --> serial number, character 8
...
r7843[19] = 0 dec --> ASCII characters = " " --> serial number, character 20
r7843[20] = 0 dec
Serial number = 111923E
r7901[0...75] Sampling times / t_sample
Access level: 4
Can be changed: -
Units group: -
Min
- [µs]
Description: Displays the sampling times currently present on the drive unit.
For r7901[x] = 0, the following applies:
The time slice is not active.
r7903 Hardware sampling times still assignable / HW t_samp free
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the number of hardware sampling times that can still be assigned.
These free sampling times can be used by OA applications such as DCC (Drive Control Chart) or FBLOCKS (free
function blocks).
Note: OA: Open Architecture
r8570[0...39] Macro drive object / Macro DO
Access level: 1
Can be changed: -
Units group: -
Min
-
Description: Displays the macro file saved in the appropriate directory on the memory card/device memory.
Dependency: Refer to: p0015
Note: For a value = 9999999, the following applies: The read operation is still running.
r8571[0...39] Macro Binector Input (BI) / Macro BI
Access level: 4
Can be changed: -
Units group: -
Min
-
Description: Displays the ACX file saved in the appropriate directory in the non-volatile memory.
Note: For a value = 9999999, the following applies: The read operation is still running.
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Calculated: -
Scaling: -
Unit selection: -
Max
- [µs]
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Parameters
List of parameters
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [µs]
Data type: Unsigned16
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
1-393