Siemens SINAMICS G120D List Manual page 483

Index: [0] = Minuend X1
[1] = Subtrahend X2
r20107 CO: SUB 1 difference Y / SUB 1 difference Y
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for the difference Y = X1 - X2 of instance SUB 1 of the subtractor.
p20108 SUB 1 run-time group / SUB 1 RTG
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
5
Description: Setting parameter for the run-time group in which instance SUB 1 of the subtractor is to be called.
Value: 5:
6:
9999: Do not calculate
p20109 SUB 1 run sequence / SUB 1 RunSeq
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
0
Description: Setting parameter for the run sequence of instance SUB 1 within the run-time group set in p20108.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20110[0...3] CI: MUL 0 inputs / MUL 0 inputs
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: T
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source of the factors X0, X1, X2, X3 of instance MUL 0 of the multiplier.
Index: [0] = Factor X0
[1] = Factor X1
[2] = Factor X2
[3] = Factor X3
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Run-time group 5
Run-time group 6
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Parameters
List of parameters
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 7220
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7220
Factory setting
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7220
Factory setting
250
Data type: U32 / FloatingPoint32
Dyn. index: -
Func. diagram: 7222
Factory setting
0
1-483