Siemens SINAMICS G120D List Manual page 72

Parameters
List of parameters
r0370[0...n] Motor stator resistance cold / Mot R_stator cold
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description: Displays the motor stator resistance at an ambient temperature (p0625).
The value does not include the cable resistance.
Dependency: Refer to: p0625
r0372[0...n] Cable resistance / Mot R_cable
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description: Displays the total cable resistance between power unit and motor, as well as the internal converter resistance.
Dependency: Refer to: r0238, p0352
r0373[0...n] Motor rated stator resistance / Mot R_stator rated
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description: Displays the rated motor stator resistance at rated temperature (total of p0625 and p0627).
Dependency: Refer to: p0627
Note: The parameter is not used for synchronous motors (p0300 = 2xx).
r0374[0...n] Motor rotor resistance cold / Mot R_r cold
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description: Displays the motor rotor resistance at an ambient temperature p0625.
Dependency: Refer to: p0625
Note: The parameter is not used for synchronous motors (p0300 = 2xx).
r0376[0...n] Rated motor rotor resistance / Mot R_rotor rated
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description: Displays the nominal rotor resistance of the motor at the rated temperature.
The value is the sum of p0625 and p0628.
Dependency: Refer to: p0628
Note: The parameter is not used for synchronous motors (p0300 = 2xx).
1-72
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: -
Factory setting
- [ohm]
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: -
Factory setting
- [ohm]
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: -
Factory setting
- [ohm]
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: -
Factory setting
- [ohm]
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: -
Factory setting
- [ohm]