Siemens SINAMICS G120D List Manual page 136

Parameters
List of parameters
r0946[0...65534] Fault code list / Fault code list
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Lists the fault codes stored in the drive unit.
The indices can only be accessed with a valid fault code.
Dependency: The parameter assigned to the fault code is entered in r0951 under the same index.
r0947[0...63] Fault number / Fault number
Access level: 2
Can be changed: -
Units group: -
Min
-
Description: This parameter is identical to r0945.
r0948[0...63] Fault time received in milliseconds / t_fault recv ms
Access level: 3
Can be changed: -
Units group: -
Min
- [ms]
Description: Displays the system runtime in milliseconds when the fault occurred.
Dependency: Refer to: r0945, r0947, r0949, r2109, r2130, r2133, r2136
Notice: The time comprises r2130 (days) and r0948 (milliseconds).
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
When the parameter is read via PROFIdrive, the TimeDifference data type applies.
r0949[0...63] Fault value / Fault value
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays additional information about the fault that occurred (as integer number).
Dependency: Refer to: r0945, r0947, r0948, r2109, r2130, r2133, r2136
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
p0952 Fault cases counter / Fault cases qty
Access level: 3
Can be changed: U, T
Units group: -
Min
0
Description: Number of fault situations that have occurred since the last reset.
1-136
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
- [ms]
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
65535
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: Unsigned16
Dyn. index: -
Func. diagram: 8060
Factory setting
-
Data type: Unsigned16
Dyn. index: -
Func. diagram: 1750, 8060
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: 1750, 8060
Factory setting
- [ms]
Data type: Integer32
Dyn. index: -
Func. diagram: 1750, 8060
Factory setting
-
Data type: Unsigned16
Dyn. index: -
Func. diagram: 1710, 8060
Factory setting
0