Siemens SINAMICS G120D List Manual page 17

Index
The name and meaning of each individual index is specified for indexed parame-
ters.
The following applies to the values (Min, Max, Factory setting) for indexed adjust-
able parameters:
• Min, Max:
The adjustment range and unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specified with the
unit to represent all indices.
When the indices have different factory settings, they are all listed individually
with the unit.
Bit array
For parameters with bit arrays, the following information is provided about each
bit:
• Bit number and signal name
• Meaning for signal states 1 and 0
• Function diagram (FP) (optional).
The signal is shown on this function diagram.
Dependency
Conditions that must be fulfilled in conjunction with this parameter. Also includes
special effects that can occur between this parameter and others.
Where necessary, "See also:" indicates the following information:
• List of other relevant parameters to be considered.
• List of faults and alarms to be considered.
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Parameters
Overview of parameters
1-17