Siemens SINAMICS G120D List Manual page 10

Parameters
Overview of parameters
Note:
The parameter list can contain parameters that are not visible in the expert lists
of the respective commissioning software (e.g. parameters for trace functions).
BICO technology: Long parameter name / short parameter name
The following abbreviations can appear in front of the BICO parameter name:
• BI:
• BO:
• CI:
• CO:
• CO/BO: Connector/Binector Output
Note:
A BICO input (BI/CI) cannot be interconnected with just any BICO output (BO/CO,
signal source).
When interconnecting a BICO input using the commissioning software, only the
corresponding possible signal sources are listed.
Function diagrams 1020 ... 1030 explain the symbols for BICO parameters and
how to deal with BICO technology.
1-10
Binector Input
This parameter is used for selecting the source of a digital signal.
Binector Output
This parameter is available as a digital signal for interconnection
with other parameters.
Connector Input
This parameter is used for selecting the source of an "analog" sig-
nal.
Connector Output
This parameter is available as an "analog" signal for interconnec-
tion with other parameters.
This parameter is available as an "analog" and digital signal for
interconnection with other parameters.
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013