Siemens SINAMICS G120D List Manual page 441

r9780 SI monitoring clock cycle (processor 1) / SI mon_clk cyc P1
Access level: 3
Can be changed: -
Units group: -
Min
- [ms]
Description: Displays the clock cycle time for the Safety Integrated Basic Functions on processor 1.
Note: Information regarding the relationship between monitoring clock cycle and response times can be found in the fol-
lowing references:
- SINAMICS S120 Function Manual Safety Integrated
- technical documentation for the particular product
r9781[0...1] SI checksum to check changes (processor 1) / SI chg chksm P1
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the checksum for tracking changes for Safety Integrated.
These are additional checksums that are created to track changes (fingerprint for the "safety logbook" functionality)
to safety parameters (that are relevant for checksums).
Index: [0] = SI checksum to track functional changes
[1] = SI checksum to track hardware-specific changes
Dependency: Refer to: p9601, p9729, p9799
Refer to: F01690
r9782[0...1] SI time stamp to check changes (processor 1) / SI chg t P1
Access level: 3
Can be changed: -
Units group: -
Min
- [h]
Description: Displays the time stamps for the checksums for tracking changes for Safety Integrated.
The time stamps for the checksums for tracking changes (fingerprint for the "safety logbook" functionality) made to
safety parameters are saved in parameters p9781[0] and p9781[1].
Index: [0] = SI time stamp for checksum to track functional changes
[1] = SI time stamp for checksum to track hardware-specific changes
Dependency: Refer to: p9601, p9729, p9799
Refer to: F01690
r9784[0...1] SI Motion diagnostics sensorless acceleration / Diag sl a
CU240D-2_DP_F Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_DP_F
Units group: -
CU250D-2_PN_F
Min
- [rev/s²]
Description: Display to diagnose acceleration values of the encoderless actual values sensing.
Index: [0] = Setpoint acceleration value
[1] = Actual acceleration value
Dependency: Refer to: p9589
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Calculated: -
Scaling: -
Unit selection: -
Max
- [ms]
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
- [h]
Calculated: -
Scaling: -
Unit selection: -
Max
- [rev/s²]
Parameters
List of parameters
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 2802
Factory setting
- [ms]
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [h]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [rev/s²]
1-441