Siemens SINAMICS G120D List Manual page 112

Parameters
List of parameters
p0731 BI: CU signal source for terminal DO 1 / CU S_src DO 1
Access level: 2
Can be changed: U, T
Units group: -
Min
-
Description: Sets the signal source for terminal DO 1 (X05.2)
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
Note: DO: Digital Output
r0747 CU digital outputs status / CU DO status
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the status of digital outputs.
Bit field: Bit Signal name
00 DO 0 (NO: X05.4)
01 DO 1 (NO: X05.2)
Note: DO: Digital Output
T: Terminal
Relay output: NO = normally open, NC = normally closed
Inversion using p0748 has been taken into account.
p0748 CU invert digital outputs / CU DO inv
Access level: 3
Can be changed: U, T
Units group: -
Min
-
Description: Setting to invert the signals at the digital outputs.
Bit field: Bit Signal name
00 DO 0 (NO: X05.4)
01 DO 1 (NO: X05.2)
Note: DO: Digital Output
T: Terminal
Relay output: NO = normally open, NC = normally closed
r0751.0...9 BO: CU analog inputs status word / CU AI status word
CU240D-2_DP Access level: 3
CU240D-2_DP_F
Can be changed: -
CU240D-2_PN
Units group: -
CU240D-2_PN_F
Min
-
Description: Displays the status of analog inputs.
Bit field: Bit Signal name
00 Analog input AI0 wire breakage
1-112
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
High
High
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Inverted
Inverted
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 1510, 2030, 2130
Factory setting
52.7
Data type: Unsigned32
Dyn. index: -
Func. diagram: 2130, 2131, 2132,
2133
Factory setting
-
0 signal
Low
Low
Data type: Unsigned32
Dyn. index: -
Func. diagram: 2030, 2031, 2130,
2131, 2132, 2133
Factory setting
0000 bin
0 signal
Not inverted
Not inverted
Data type: Unsigned16
Dyn. index: -
Func. diagram: 9566, 9568
Factory setting
-
0 signal
No
FP
-
-
FP
-
-
FP
-