4 Repair
4.6.5 Unloading the balancing device
Continued
Press tool and hydraulic cylinder
The figure below shows the hydraulic cylinder mounted on the press tool.
The press tool includes two press devices that are used to different models of the
balancing device.
xx0200000174
A
B
C
D
E
F
G
Required equipment
Equipment, etc.
Press tool, balancing device
Hydraulic cylinder
Hydraulic pump 80 MPa
Standard toolkit
Continues on next page
380
Press block
Hydraulic cylinder
Press device
Bolt, press device
Moving pin with marking
Bolt (4 pcs)
Pin, attached to the fix plate
Article number
3HAC020902-001
3HAC11731-1
3HAC13086-1
-
© Copyright 2013 ABB. All rights reserved.
Note
To be used with the press tool.
To be used with the hydraulic cylinder.
Content is defined in section
toolkit on page
559.
3HAC044266-001 Revision: -
Standard