ABB IRB 6700 Product Manual page 151

4
5
6
7
8
9
3HAC044266-001 Revision: -
Action
Remove the protective cap from the nipple
of the oil hole and connect the oil dis-
penser.
Remove the plug from the vent hole.
Note
The vent hole is opened to let out air during
the filling process.
Refill the gearbox with oil.
Note
The amount of oil to be filled depends on
the amount previously being drained.
Inspect the oil level at the vent hole (level
plug).
Remove the oil dispenser and refit the
protective cap to the nipple.
Refit the level plug.
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.4.4 Changing oil, axis-3 gearbox
Note
xx1200000954
xx1200000955
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
xx1200000955
Required oil level is: 0 - 10 mm below the
oil plug hole.
More information is found in
oil level in axis-3 gearbox on page
Tightening torque: 24 Nm
Continues on next page
Continued
Inspecting the
109.
151