ABB IRB 6700 Product Manual page 436

4 Repair
4.7.5 Replacing the axis-5 motor
Continued
Connecting the motor cables
1
2
3
Continues on next page
436
Action
Push the motor cables in through the cable
gland opening.
Refit the cable gland cover by performing
the following steps:
• Slide the cable gland cover onto the
inner screw.
• Refit and tighten the outer screw.
• Tighten the inner screw. Make sure
that the gasket is not damaged.
Note
Replace the gasket if damaged!
Connect the connectors.
Connect in accordance with the markings
on the connectors.
© Copyright 2013 ABB. All rights reserved.
Note
xx1300000738
xx1200001016
xx1200001015
3HAC044266-001 Revision: -