3.3.5 Inspecting the oil level in axis-5 gearbox
Location of oil plug
The gearbox has a level plug that is located as shown in the figure.
xx1200000959
Tightening torque: 24 Nm
Required tools
Equipment, etc.
Standard toolkit
Required consumables
Consumables
Lubricating oil
Required documents
Document name
Technical reference manual - Lubrication in gearboxes
Inspecting the oil level in axis-5 gearbox
Use this procedure to inspect the oil level in the gearbox.
1
2
3HAC044266-001 Revision: -
Action
Run the robot to calibration position.
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot
working area.
© Copyright 2013 ABB. All rights reserved.
3.3.5 Inspecting the oil level in axis-5 gearbox
Article number
Note
-
Content is defined in section
toolkit on page
Article number
Note
-
Information about the oil is found in
Technical reference manual - Lubrica-
tion in gearboxes.
Note
3 Maintenance
Standard
559.
Document number
3HAC042927-001
Continues on next page
113