ABB IRB 6700 Product Manual page 405

4
5
6
7
8
Concluding procedure
1
3HAC044266-001 Revision: -
Action
Check the o-ring.
Replace if damaged!
Wipe clean o-ring and o-ring groove.
Refit the o-ring.
Refit the motor cover with its attachment
screws.
Note
Do not reuse the self-threading attachment
screws! Replace with standard attachment
screws. The threads will otherwise be
damaged.
Note
Make sure the o-ring is undamaged and
properly fitted!
Make sure that the covers are tightly
sealed.
Action
Use caution and jog axis-2 a little to fa-
ciltate the removel of the M16 lock screw.
© Copyright 2013 ABB. All rights reserved.
4.7.2 Replacing the axis-2 motor
Note
O-ring, axis-1: 3HAB3772-111
O-ring, axis-2: 3HAB3772-111
O-ring, axis-3: 3HAB3772-111
O-ring, axis-4: 3HAB3772-110
xx1200001070
xx1200001135
Note
Continues on next page
4 Repair
Continued
405