ABB IRB 6700 Product Manual page 80

2 Installation and commissioning
2.4.4 Lifting the robot with roundslings
Continued
2
3
4
Continues on next page
80
Action
Fit lifting eyes to the outer holes on each
corner of the base.
Run roundslings through the lifting eyes
and fasten them in an overhead crane.
CAUTION
If the lifting eyes have sharp edges that
might damage the roundslings, lifting
shackles must be used to attach the
roundslings to the lifting eyes.
Attach a securing roundsling at the rear
according to figure.
Note
The securing sling must not be strained at
lifting. It only secures for tipping.
© Copyright 2013 ABB. All rights reserved.
Note
xx1200001301
xx1200001302
Make sure the roundslings do not rub
against any sharp edges.
Roundsling, 2.5 m (4 pcs)
xx1300001572
Roundsling, 2 m
xx1300001573
3HAC044266-001 Revision: -