Display Pim Neighbor - H3C s3600 series Command Manual

View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display pim interface command to display the PIM configuration information.
With an interface specified, the command displays the PIM configuration information on the specified
interface; otherwise, the command displays the PIM configuration information on all interfaces.
Examples
# Display the PIM configuration information on all interfaces.
<Sysname> display pim interface
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
PIM neighbor limit is 128
PIM neighbor policy is none
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
Table 3-2 display pim interface command output description
IP address of the interface
PIM version
PIM mode
PIM query interval
PIM neighbor limit
PIM neighbor policy
Total 1 PIM neighbor on interface
PIM DR

display pim neighbor

Syntax
display pim neighbor [ interface interface-type interface-number ]
Field
IP address of the VLAN interface
PIM version running on the interface
PIM mode enabled on the VLAN interface (DM or SM)
Hello interval
Limit on the number of PIM neighbors on the VLAN
interface. No neighbor can be added when the limit is
reached
Filtering policy of the PIM neighbors on the current interface
Totally, one PIM neighbor is present on this VLAN interface.
Designated router
3-5
Description