Show Spanning-Tree Bridge; Table 261: Show Spanning-Tree Bridge Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show spanning-tree bridge

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show spanning-tree bridge
<brief | detail>
<msti msti-id>
<routing-instance routing-instance-name>
<vlan-id vlan-id>
show spanning-tree bridge
<brief | detail>
<msti msti-id>
<vlan-id vlan-id>
Command introduced in Junos OS Release 8.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the configured or calculated Spanning Tree Protocol (STP) parameters.
none —(Optional) Display brief STP bridge information for all multiple spanning-tree
instances (MSTIs).
—(Optional) Display the specified level of output.
brief | detail
msti msti-id —(Optional) Display STP bridge information for the specified MSTI.
routing-instance routing-instance-name
the specified routing instance.
vlan-id vlan-id —(Optional) Display STP bridge information for the specified VLAN.
view
show spanning-tree bridge routing-instance on page 1874
show spanning-tree bridge msti on page 1875
show spanning-tree bridge vlan-id (MSTP) on page 1875
show spanning-tree bridge (VSTP) on page 1876
show spanning-tree bridge vlan-id (VSTP) on page 1877
Table 261 on page 1873 lists the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 261: show spanning-tree bridge Output Fields

Field Name
Routing instance name
Enabled protocol
Root ID
Chapter 75: Operational Commands for Spanning-Tree Protocols
—(Optional) Display STP bridge information for
show spanning-tree bridge
Field Description
Name of the routing instance under which the bridge is configured.
Spanning Tree Protocol type enabled.
Bridge ID of the elected spanning tree root bridge. The bridge ID
consists of a configurable bridge priority and the MAC address of
the bridge.
command.
1873