Show Resource - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show resource

Syntax
Release Information
Description
Options
Mode
1104
show resource [ [ if-type { atm-active-sub-if | atm-sub-if | atm-vc | ip | ppp-link }
[ system | slot slot ] ] | [ threshold [ trap [ status ] ] ]
Command introduced before JunosE Release 7.1.0.
Displays statistical information about resources and their current threshold configurations.
if-type—Indicates interface type; see "Interface Types and Specifiers" on page 5
atm-active-sub-if—Active ATM subinterfaces
atm-sub-if—Both active and inactive ATM subinterfaces
atm-vc—ATM virtual circuits
ip—IP interfaces
ppp-link—PPP link interfaces
system—All slots on the system
slot—Number of the chassis slot in the range 0–2 (ERX310 model), 0–6 (ERX7xx
models), and 0–13 (ERX14xx models)
threshold—Displays threshold information (optional keyword when used alone)
trap—Displays threshold trap status
status—Displays threshold trap status (optional keyword)
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.