Table of Contents
Advertisement
show bgp ipv6 peer-group
show bgp ipv6
Syntax
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
peer-group [ peerGroupName ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords added in JUNOSe Release 8.2.0.
Displays information about BGP peer groups.
Description
Options
Privileged Exec, User Exec
Mode
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling Specifies the route-target address family
peerGroupName Name of the BGP peer group
filter See Filtering show Commands on page 4
Chapter 7: S Commands
show bgp ipv6 peer-group
593
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?